Kinze ISOBUS Electronics Package (4900) Rev. 4/14 - Manual (Page 56)

M0250 ISOBUS
52 Rev. 4/14
TM
FERTILIZER
Flow Meter Pulses/Gallon
This sets the pulses per gallon for the flow sensor being used.
Low Tank Level Alarm Response Time
This sets the amount of time the alarm condition must exist before the visual and audible alarm comes up. If the
response time is set to 10 seconds, the tank level sensor must show LOW for 10 seconds before an alarm will appear.
high/Low Rate Threshold
This sets the threshold for where a visual and audible alarm for high or low fertilizer rate will appear while planting.
Alarm Response Time
This sets the amount of time the alarm condition must exist before the visual and audible alarm comes up. If the
response time is set to 10 seconds, the fertilizer rate has to be above the threshold for 10 seconds before a high
fertilizer rate alarm is displayed.
Control valve Step Size
This sets the step size for fertilizer adjustment. Increase this number for faster response time. Decrease it for more
accurate control.
Enable Flow Sensor Alarm
This setting turns the individual flow sensor alarms on and off.
This screen also displays diagnostic information for fertilizer which includes the current set rate, actual rate being
applied, pulses per second from the flow meter, tank level status and control valve state.
Settings