Kinze ISOBUS Electronics Package (4900) Rev. 4/14 - Manual (Page 60)

M0250 ISOBUS
56 Rev. 4/14
TM
DOwN FORCE SETTINGS
PSI to Force Formula
This sets the conversion from pounds per square inch to pounds of force.
Zero Pressure Sensor Command
If there is zero pressure in the air bags but the screen is still reading a force, the zero button can be used to set the
zero point of the sensor.
Low Down Force Threshold
This sets the threshold for where a visual and audible alarm for low down force will appear while planting.
Alarm Response Time
This sets the amount of time the alarm condition must exist before the visual and audible alarm comes up. If the
response time is set to 10 seconds and the down force has been below the threshold for more than 10 seconds, an
alarm will appear.
Settings