Klein Tools VDV501-814 - Manual (Page 11)

11
ENGLISH
WIRING AND DISPLAY EXAMPLES
Coax Cable with an Open:
Coax Cable with an Open: There is a break in the cable
continuity. A break in the shield or in the center wire can cause
an open fault. The cable does not pass and the ID remote
number on the other end of the cable cannot be determined.
Coax Cable with a Short:
Coax Cable with a Short: The center wire of the cable is connected
to the shield, creating a short. The cable does not pass and the ID
remote number on the other end of the cable cannot be determined.
1. Remove single screw in the middle of the back of the VDV Scout™ Pro with a #1 Phillips head screwdriver.
Remove battery door.
2. Disconnect battery cable and recycle exhausted battery.
3. Acquire a 9 volt alkaline battery (IEC 6LR61, ANSI/NEDA 1640A).
4. Connect battery cable to new battery observing polarity and place into battery compartment.
5. Replace battery door and screw, taking care not to over-tighten it.
WARRANTY
This product is warranted to be free from defects in materials and workmanship for a period of two years from the date of
purchase. During this warranty period, Klein Tools has the option to repair, replace or refund the purchase price of any unit which
fails to conform to this warranty under normal use and service. This warranty does not cover damage which occurs in shipment
or failure which results from alteration, tampering, accident, misuse, abuse, neglect, or improper maintenance. Batteries and
damage resulting from failed batteries are not covered by warranty. A purchase receipt or other proof of original purchase date will
be required before warranty repairs will be rendered.
Any implied warranties, including but not limited to implied warranties of merchantability and fi tness for a particular purpose, are
limited to the express warranty. Klein Tools shall not be liable for loss of use of the instrument or other incidental or consequential
damages, expenses, or economic loss, or for any claim or claims for such damage, expenses or economic loss.
Some states or countries laws vary, so the above limitations or exclusions may not apply to you. This warranty gives you specifi c
legal rights, and you may also have other rights which vary from state to state. If your Klein product requires repair or for
information on how to exercise your rights under the terms of this warranty, please contact Klein Tools at 1-800-553-4676.
CLEANING
Turn instrument off and disconnect any cables. Clean the instrument by using a damp cloth. Do not use abrasive cleaners or solvents.
STORAGE
Remove the batteries when instrument is not in use for a prolonged period of time. Do not expose to high temperatures or
humidity. After a period of storage in extreme conditions exceeding the limits mentioned in the Specifi cations section, allow the Specifi cations Specifi cations
instrument to return to normal operating conditions before using it.
DISPOSAL / RECYCLE
Caution: This symbol indicates that equipment and its accessories shall be subject to a separate collection and correct disposal.
CUSTOMER SERVICE
KLEIN TOOLS, INC. 450 Bond Street Lincolnshire, IL 60069
1-800-553-4676 • www.kleintools.com
BATTERY REPLACEMENT