Landoll PT Series 10 through 20 Transport Pulverizer - Manual (Page 19)

ASSEMBLY
2-9
Wheel Arms to Center Frame
Installation
1. Using 5/8-11 x 5 1/2” x 6 11/16” center U-bolts, 5/8”
Lockwashers and Nut, attach the wheel arms to the
center frame. The 18-20 ft models use straps and 5/8
bolts in place of U-bolts.
The distance separating the wheel arms is adjustable. It
is recommended that the wheel arms be 7 feet apart or
1/2 the Pulverizer width, whichever is greater. See
Figure 2-10.
2. Mount the wheels to the axle hubs with the 1/2”
Wheel Bolts provided.

CAUTION
Figure 2-10: Wheel Arm Installation
Wheel arms should always be equidistant from
the center of the machine and should never be
mounted on the frame extensions.
U-BOLT, 5/8”
MACHINE
BOLTS, 5/8” WITH STRAPS
OR
LOCKWASHER, 5/8”
NUT, 5/8”
WHEEL BOLT, 1/2”