Leica Biosystems EG1150 H - Manual (Page 16)

16 Instructions for Use V 2.5 RevF – 09/2014
4. Instrument Setup
4.4 Necessary assembly work
Install the following accessories and make the appropriate adjustments to
make the instrument ready for use:
• Install accessories.
• Adjust instrument feet if necessary.
• Install magnifier (optional).
• Connect foot switch (optional).
• Connect to the power supply.
Install accessories
 Install embedding mold tray (2) and cassette tray (3).
Depending on the preferred working direction, the two heated trays (11)
can be used for molds or cassettes as required.
 Close mold/cassette tray with the corresponding lids (4), (5).
 Push the paraffin collection tray (6) into the respective guide underneath
the work top.
 Insert the forceps holder (1).
 Insert the filtering screen (7) in the paraffin outlet hole (8) inside the
paraffin reservoir so that the black O-ring seals the hole.
 Place the lid (9) on the paraffin reservoir.
Adjustable instrument feet
The four feet are height-adjustable to allow the instrument to be adjusted
to match the height of other devices or to compensate slight depressions
on the surface.
Lift the instrument slightly and turn the instrument foot (10 in Fig. 6 ) to adjust
it to the proper height.
To ensure a safe stand, all of the four feet must be adjusted to the same height.