Leica Biosystems EG1150 H - Manual (Page 26)

26 Instructions for Use V 2.5 RevF – 09/2014
5. Operation
5.3 Control panel functions
1 - Cassette or embedding mold tray, left
2 - Paraffin reservoir and dispenser
3 - Work surface
4 - Cassette or embedding mold tray, right
The control panel beside the standby switch (8) consists of a foil keyboard
with push buttons, LEDs and a single-line display.
It is divided into two control areas:
temperature setting and display and instrument control and programming.
LED display for the
individual heating areas
Display:
standard indication
is real time
Set time
Working day
selection
Illumination
On/Off
Set buttons for
Programming
Activation of
enhanced mode
Selector switch for
Standby mode
or
working day ON/OFF
LEDs for mode indication of:
5 - Working day/weekday
6 - Start and end time, current time
7 - Current working day
Temperature setting buttons
of the heating areas
3 1 2 4
5
6
7
8
Fig. 17
Fig. 18
Temperature control
and display
Instrument control and
programming