Lenze i700 Manual - Manual (Page 47)

Technical data
Terminal description
Supply modules
4
l
47 EDS700ACBA EN 4.0
Connection to the DC bus (+U
G
, −U
G
)
X101/X102 Labelling Description
UG+ DC−bus voltage UG+
UG− DC−bus voltage UG−
Open the protection cover only if the device is deenergised!
To open the protection cover, press the lock between the clips of the
cover down using a screwdriver and swivel the protection cover
away from the device at the same time.
i700PX1012
Terminal data
Conductor cross−section Tightening torque !
[mm 2 ] [AWG] [Nm] [lb−in]
Swivel hook − − 5.0 44.3 PH 3
X101
X102 Electrical data
UG+
UG− Rated voltage 565/675 V
Current Up to 40 °C: 100 A
40 ... 55 °C: −2.5 %/K
Polarity reversal
protection For internal connection: not relevant