Lenze EMF2133IB - Manual (Page 106)

Parameter data transfer
PROFIdrive parameter data channel
PROFIdrive DP−V1
8
l
106 EDSMF2133IB EN 5.0
8.3.1.9 Response to a write request error
)
Note!
For a multi−parameter request, the correct and possibly faulty messages are
combined in one telegram. The individual messages have the following data
contents:
ƒ Correct message
– Format: 0x40 (zero)
– Number of values: 0x00
ƒ Faulty message
– Format: 0x44
– Number of values: 0x01 or 0x02
– Error code without additional information (for number of values = 0x01)
or
– error code with additional information (for number of values = 0x02)
A faulty access to a parameter "n" is indicated at the nth position in the
response telegram of a multi−parameter request.
Response header
Byte 1 Byte 2 Byte 3 Byte 4
U8
Request reference
(mirrored)
U8
Response identification
U8
Axis
(mirrored)
U8
Number of indexes
Request reference: Mirrored value of parameter request
Response identification: 0x82 (write error)
An error code is transmitted, see below
Axis: 0x00 or 0x01
Number of indexes: 0x"n" (number of parameters requested)
Parameter format
Byte 5 Byte 6
U8
Format
U8
Number of values
Format: 0x44, error
Number of values: 0x01 (error code without additional information)
0x02 (error code with additional information)
Error code
Byte 7 Byte 8 Byte 9 Byte 10
U16
Error code
U16
Additional information if available
Error code: 0x0000 ... 0x00FF
^ 109 (Error code list)
(Additional information)