Lenze E82ZAFVC001_ - Manual (Page 52)

5 Commissioning
Setting the baud rate and address
EDK82ZAFVC001 DE/EN/FR 2.0 52
l
H1inbet−reihenfolge einhalten
Baud rate setting
)
Note!
The baud rate must be the same for all devices and the scanner.
ON
1 6 2 7 4 3 8 5 9 10
ON
OFF
Fig. 3 Baud rate setting
Baud rate S7 S8
125 kbits/s OFF OFF
250 kbits/s OFF ON
500 kbits/s ON OFF
Setting of baud rate (and node address) via software
configuration.
The baud rate can be
l set manually via software or
l automatically detected.
ON ON