Lenze PM94P01C - Manual (Page 9)

PM94P01C 7
Introduction
Table 3a: Main Menu Text Pull-Down Folders
Main Menu
Node Project Tools View Help
New configuration file New project Browse motor database Toolbar MotionView help
Open configuration file Open project Clear output window Status Bar Product manuals
Save configuration file Close project About MotionView
Load configuration file Save project Time stamp
Set all parameters to default Save all configuration files
Connect drive Options
Disconnect all coneected drives Connection setup
Remove node from project Recent file
Table 3b: Main Menu Icon Functions
Icon Function Description
Connect Build a connection list of the drive(s) to communicate with on the network. Build the
connection list by using any one of these three methods:
Discover [Discover] button discovers all drives on the network that are available for connectivity. Once
drives have been discovered they are listed in the ‘Connect to drive’ list box. To connect one
or a number of drives highlight their IP address in this window and press the [Connect] button.
The ‘Ctrl’ key on your keyboard can be used to select multiple drives for connection.
Connect If the IP address on the drive is known, enter it in the IP address dialog box and then select
[Connect] to access the drive.
Find by name If a drive has been assigned a specified “Drive Name”, enter this name in the Name dialog box
and then select [Find by name]. The IP address should then appear in the “Connect To Drive”
list. The drive can now be connected by highlighting and pressing the [Connect] button.
Connected Drive is connected as a node on the network.
Disconnect Terminate connection to the drive selected (backlit) in the Node Tree.
Add File Import a configuration file to the drive
Open File Recall & open any previously saved configuration files and connection parameters.
Save Save the configuration file and the connection parameters of the drive selected in Node Tree.
Save As Save the configuration file and the connection parameters of the drive selected in Node Tree.
Remove Node Remove a node from the network
Print Print a report for the currently selected drive, containing all parameter set-up and
programming information.
Help Open MotionView Help folder (from original installation CD)