4 commissioning – Lenze SCF frequency inverter User Manual
Page 34
34
Lenze 13466146 EDBSF01 v24 EN
4 Commissioning
NOTE 1: Factory defaults are shown for a 60 Hz base frequency. refer to Parameter 48 for 50 Hz base frequency.
NOTE 2: Maximum setting is 999.9 Hz on drives with High Output Frequency option. Consult the factory.
NOTE 3: If LINE VOLTAGE is set to LOW, maximum setting is 150%.
NOTE 4: Maximum setting is 1300.0 Hz (factory default is 999.9) on drives with High Output Frequency option.
Consult the factory.
NO.
PARAMETER NAME
RANGE OF ADJUSTMENT
FACTORY
DEFAULT
(NOTE 1)
12
TB-13C FUNCTION
SELECT
NONE (01), 0-10 VDC (02), 4-20 mA (03),
PRESET SPEED #3 (04), INCREASE FREQ (05),
EXTERNAL FAULT (06), REMOTE KEYPAD (07),
DB FAULT (08), ACCEL/DECEL #2 (09)
NONE (01)
13
TB-15 OUTPUT
(SEE PARAMETER 6 - TB-14 OUTPUT)
NONE (01)
14
CONTROL
TERMINAL STRIP ONLY (01),
REMOTE KEYPAD ONLY (02),
TERMINAL STRIP OR REMOTE KEYPAD (03)
TERMINAL STRIP
ONLY (01)
15
SERIAL LINK
DISABLE (01)
9600, 8, N, 2 WITH TIMER (02),
9600, 8, N, 2 WITHOUT TIMER (03),
9600, 8, E, 1 WITH TIMER (04),
9600, 8, E, 1 WITHOUT TIMER (05),
9600, 8, O, 1 WITH TIMER (06),
9600, 8, O, 1 WITHOUT TIMER (07)
9600, 8, N, 2
WITH TIMER
(02)
16
UNITS EDITING
TENTHS OF UNITS M(01)
WHOLE UNITS (02)
WHOLE
UNITS (02)
17
ROTATION
FORWARD ONLY (01),
FORWARD AND REVERSE (02)
FORWARD
ONLY (01)
18
MOTOR OVERLOAD
TYPE
SPEED COMPENSATION (01)
NO SPEED COMPENSATION (02)
SPEED
COMPENSATION
(01)
19
ACCELERATION TIME
0.1 - 3600.0 SEC
20.0 SEC
20
DECELERATION TIME
0.1 - 3600.0 SEC
20.0 SEC
21
DC BRAKE TIME
0.0 - 3600.0 SEC
0.0 SEC
22
DC BRAKE VOLTAGE
0.0 - 30.0 %
0.00%
23
MINIMUM FREQUENCY
0.0 - MAXIMUM FREQUENCY
0.0 Hz
24
MAXIMUM FREQUENCY
MINIMUM FREQ - 240.0 Hz (NOTE 2)
60.0 Hz
25
CURRENT LIMIT
30 - 180% (NOTE 3)
180%
26
MOTOR OVERLOAD
30 - 100 %
100%
27
BASE FREQUENCY
25.0 - 500.0 Hz (NOTE 4)
60.0 Hz