Lenze SCF frequency inverter - Manual (Page 6)

6
Lenze 13466146 EDBSF01 v24 EN
1 Safety Information
The documentation contains information about installation in compliance with EMC (shielding,
grounding, filters and cables). These notes must also be observed for CE-marked controllers.
The manufacturer of the system or machine is responsible for compliance with the required limit
values demanded by EMC legislation.
APPLICATION
The drive must not be used as a safety device for machines where there is a risk of personal injury or
material damage. Emergency Stops, over-speed protection, acceleration and deceleration limits, etc
must be made by other devices to ensure operation under all conditions.
The drive does feature many protection devices which are aimed at protecting the drive and the driven
equipment by generating a fault and shutting the drive and motor down by removing power. Mains
power variances can also result in shutdown of the drive. When the fault condition disappears or is
cleared, the drive can be configured to automatically restart, it is the responsibility of the user and/
or OEM and/or integrator to ensure that the drive is configured for safe operation.