Lenze SL - Manual (Page 27)

Lenze 13466147 EDBSM01 v19 EN 27
Commissioning 4
Use the p and q buttons to scroll to the password value (the factory default password is “225”) and
press the Mode button. Once the correct password value is entered, the display will read "P01", which
indicates that the PROGRAM mode has been accessed at the beginning of the parameter menu (P01
is the first parameter). This is shown below:
Press Mode to enter password
Use p and q to scroll to the
password value
Parameter menu is accessed
at the first parameter
NOTE
If the display flashes “Er”, the password was incorrect, and the process to enter the
password must be repeated.