Mechanical installation, Stop – Lenze ECSxK series User Manual
Page 20
![background image](/manuals/566210/20/background.png)
Mechanical installation
Thermally separated mounting (”push-through technique”)
4
20
EDBCSXKXXX EN 1.0
Dimensions of mounting cutout
³
60
mm
³
90
mm
a1
a1
b1
b1
1
2
0
c1
h
d
c1
g
g
ECSXK063
Fig.4-3
Dimensions of mounting cutout for thermally separated mounting, ECSDKxxx type
Mounting plate
Mounting cutout for ECSDK001
Mounting cutout for ECSDK002
Capacitor modules
Dimensions [mm]
Type
Size
A1
b1
c1
D
g
h
ECSDK001
1
78.5
197
75
250
M5
10 5
ECSDK002
2
121.5
197
75
250
M5
10.5
Mounting
Stop!
When boring through the rear panel of the control cabinet:
Seal the fixing screws with a liquid thread seal to ensure the protection
class IP54 for the separated heatsink.
For mounting the capacitor module ECSDKxxx proceed as follows:
1. Prepare fixing holes for the clips (see drawing).
2. Prepare mounting cutout.
3. Fix the clips.
4. Push the capacitor module into the mounting cutout.
5. Let the capacitor module snap into place at the top and bottom.
Show/Hide Bookmarks