Lenze ECSxK series - Manual (Page 22)

Mechanical installation
Mounting in ”cold plate” technique
4

22 EDBCSXKXXX EN 1.0
Mounting
А Б В
ECSXK030
Fig.4-5 Mounting in ”cold plate” technique
For mounting the capacitor module ECSCKxxx proceed as follows:
1. Prepare the fixing holes (see drawing)
2. Clean and degrease the contact area of cooler and heatsink (e. g. with methylated
spirit).
3. Screw the support onto the cooler.
4. Insert the capacitor module from above c into the support d and fasten both studs
with 3.5 ... 4.5 Nme.
Show/Hide Bookmarks