Lenze ECSxK series - Manual (Page 34)

Commissioning 6

34 EDBCSXKXXX EN 1.0
6 Commissioning
Before you start
Prior to initial switch-on of the drive system, check the wiring of the capacitor module for
completeness, short-circuit, and earth fault:
ƒ Power connection (X23):
– Polarity of the DC-bus voltage supply via terminals +UG and -UG
ƒ Control connection (X26):
– Wiring adjusted to the signal assignment of the control terminals.

Further information on commissioning the drive system can be obtained from
the documentations for the power supply module and axis module.
Show/Hide Bookmarks