Lenze E94ARNE Regenerative power supply - Manual (Page 182)

9400 regenerative power supply module | Parameter setting
Oscilloscope
Data records
182
L
EDS94ARNExxxx EN 2.3 - 06/2014
7.5.1 Saving/exporting a data record
After the variables to be recorded have been selected and the required settings have been
entered, you can save the configuration and recording, if already executed, for future use
in the project or export them to a file.

How to save the data record in the project:
1. Go to the Oscilloscope toolbar and click .
• The Save data record dialog box appears.
2. Enter a name in the Name of the data record to be stored input field.
3. Click Filing in the project.
• The dialog box is closed and the current data record is filed in the project.

How to export the data record to a file:
1. Go to the Oscilloscope toolbar and click .
• The Save data record dialog box appears.
2. Enter a name in the Name of the data record to be stored input field.
3. Click the Export to file button.
4. Specify the file name and folder for the data record to be stored in the Save as
dialog box.
5. Click Save.
• The dialog box is closed and the current data record is saved.

Note!
Saved configurations should only be reused for controllers of the same type.
Otherwise wrong values might be indicated because the scaling of the
oscilloscope channels is not adapted accordingly!

Note!
The data record is saved when the entire project is saved!