Lenze E94ARNE Regenerative power supply - Manual (Page 66)

9400 regenerative power supply module | Parameter setting
Device interface
Device commands
66
L
EDS94ARNExxxx EN 2.3 - 06/2014
4.1.26 CAN module: Pred.Connect.Set
The C00002 = "94: CAN module: Pred.Connect.Set" device command serves to set the basic
identifiers for the CANopen system bus interface of a CANopen communication module
inserted in module slot MXI1 or MXI2 according to the "Predefined Connection Set"
(DS301V402).

Tip!
Detailed information on the CANopen communication module (E94AYCCA) can be
found in the "CAN" Communication Manual.
Possible status displays for this device command
Related device commands
 CAN module: Reset node
( 64)
 CAN module: Identify node
( 68)
Status ( C00003 ) Meaning
6194434 Device command in process
6160384 Device command executed successfully
6160385 General fault