Lenze E94ARNE Regenerative power supply - Manual (Page 197)

EDS94ARNExxxx EN 2.3 - 06/2014
L
197
9400 regenerative power supply module | Parameter setting
Diagnostics & fault analysis
Monitoring
8.5.1 Setting the error response
When a monitoring function is actuated, the response set for this monitoring function
(fault, trouble, warning, etc.) will be activated.
 For many monitoring functions the response can be parameterised individually via
parameters.

Tip!
The table in the chapter "
Short overview (A-Z) " contains the error messages for
which a response can be set.
( 203)
8.5.2 Warning thresholds
Some of the monitoring functions respond if a defined warning threshold (e.g.
temperature) has been exceeded.
 The corresponding preset threshold values can be changed via the following
parameters:
Parameter Information
C00121 Filter temp. warning threshold
C00122 Heatsink temp. warn. threshold
C00123 Warning threshold device util.
C00126 CPU temp. warning threshold