Lenze E94ARNE Regenerative power supply - Manual (Page 65)

EDS94ARNExxxx EN 2.3 - 06/2014
L
65
9400 regenerative power supply module | Parameter setting
Device interface
Device commands
4.1.25 CAN on-board: Pred.Connect.Set
The C00002 = "93: CAN on-board: Pred.Connect.Set" device command serves to set the
basic identifiers for the CANopen system bus interface of the regenerative power supply
module ("CAN on board") according to the "Predefined Connection Set" (DS301V402).

Tip!
For detailed information about the "CAN on board" CANopen system bus interface,
please see the "CAN" Communication Manual.
Possible status displays for this device command
Related device commands
 CAN on-board: Reset node ( 63)
 CAN on-board: Identify node
( 67)
Status ( C00003 ) Meaning
6128898 Device command in process
6094848 Device command executed successfully
6094849 General fault