Lenze E94ARNE Regenerative power supply - Manual (Page 67)

EDS94ARNExxxx EN 2.3 - 06/2014
L
67
9400 regenerative power supply module | Parameter setting
Device interface
Device commands
4.1.27 CAN on-board: Identify node
The C00002 = "95: CAN on-board: Identify node" device command serves to identify the
nodes connected to the CANopen system bus interface of the regenerative power supply
module ("CAN on board").
 The result of the CAN bus scan is displayed in C00393 .

Tip!
For detailed information about the "CAN on board" CANopen system bus interface,
please see the "CAN" Communication Manual.
Possible status displays for this device command
Related device commands
 CAN on-board: Reset node
( 63)

CAN on-board: Pred.Connect.Set
( 65)
Status ( C00003 ) Meaning
6259970 Device command in process
6225920 Device command executed successfully
6225921 General fault