MK Diamond MK-770 - Manual (Page 12)

MK-770 Revision 06/05, Effective Date June 17, 2005 Page 12
UNPACKING, TRANSPORT, UNIVERSAL STAND and ASSEMBLY
TRANSPORT:
1. The MK-770 weighs approximately forty-six (46) pounds; use care when transporting.
2. Never transport the MK-770 with water in the Water Pan.
The MK-770 is designed with a rigid frame and removable Cutting Head making the saw easily transportable.
Always use proper lifting techniques when lifting the MK-770. Never transport the MK-770 with water in the
Water Pan.
To lift the saw, grasp the front and back of the frame at the lift points shown blelow.
UNIVERSAL STAND:
The MK-770 weighs forty-six (46) pounds; follow the guidelines for transport in the TRANSPORT
section, when placing it on the stand.
Note: If using the MK Diamond, Universal Stand, follow the following steps.
Lift Point Lift Point
(A)
Open the Universal Stand
and place on flat surface
(B)
Remove Water Pan
(C)
Orient the Saw
to the Stand
(D)
Seat Left (Post) Side of saw
onto stand between stand
Orientation Pin
(E)
Seat Right Side of saw onto
stand between stand and
Register Angle
(F)
Reinstall the Water Pan
Slide Water Pan
out front of Saw
Slide Water Pan
in back of Saw
Left side
of stand
Left Side
of Saw
Right Side
of Saw
Right Side
of Stand
Orientation
Pin
Seat Left (Post)
Side of Saw
Left Side
of Stand
Right Side
of Stand
Right Side
of Saw
Cutting Head
Register
Angle