MK Diamond MK-770 - Manual (Page 9)

MK-770 Revision 06/05, Effective Date June 17, 2005 Page 9
SAFETY
SAFETY LABEL LOCATIONS:
Safety labels are located according to Figures 1 through 4 below. The labels contain important safety
information. Please read the information contained on each safety label. These labels are considered a
permanent part of your saw. If a label comes off or becomes hard to read, contact MK Diamond or your
dealer for a replacement
Item Location Description Part No.
1A. Motor – Right Side Caution – Receptacle is for Water Pump Only 154822
1B. Motor – Right Side Motor Specifications N/A
2 Motor – Left Side Caution – Use with Ground Fault Circuit Interrupter 155678
3A Cutting Head – Top Warning – Read Owners Manual 155806
3B. Cutting Head – Top MK-770 Serial Number 156546
4A Pump – Left Side Warning – Connect to Grounded Receptacle N/A
4B Pump – Right Side Pump Specifications N/A
TILE SAW SPECIFIC WARNINGS:
Wear eye protection.
Use splash hood for every operation for which it can be used.
Disconnect saw before servicing, when changing cutting blades, and cleaning.
Use tool only with smooth edge cutting blades free of openings and grooves.
Replace damaged cutting blade before operating.
B
1
A
2
3
A B
4
A B