MK Diamond MK-145 220 Volt - Manual (Page 11)

MK Diamond Products Inc. Customer Service Department (800) 421-5830
MK-145 Revision 09/04, Effective date – September 23, 2004 Page 11
SAFETY:
PRODUCT SPECIFICATIONS:
The MK-145 is a versatile tabletop tile saw. Operated and used according to this manual,
the MK-145 will provide years of dependable service.
General Description:
The MK-145 tile saw is engineered as a self-contained wet saw consisting of a powerful
230v motor in a hard plastic case. The saw is capable of cutting a tile up to (1) inch
(25mm) thick. The water basin located below the tabletop can be filled with ordinary tap
water, and is easily cleaned following use.
Motor Specifications:
Motor specifications for the MK-145 are listed in Table 2 below.
Voltage 230 v
Amperage 2 a
Frequency 50/60 Hz
RPM 5,500 rpm
Weight 11 lbs/5kgs
Table 2
Blade Capacity:
The MK-145 uses a 4-1/2 inch diameter continuous rim MK Diamond blade with a 1/16-inch
cutting width. The MK 145 can miter cut at a 45-degree miter angle or a 22.5-degree angle
for octagonal shapes.
Tile Types:
The MK-145 can cut a variety of tile types including Porcelain, Terracotta, Marble, Quarry
and Slate, or almost any other non-ferrous material.
NOTE: The MK-145 is not designed to cut plastic or ferrous (metals) material.