Setup, adjustment and operation – MK Diamond MK-145 220 Volt User Manual
Page 21
Advertising
MK Diamond Products Inc. Customer Service Department (800) 421-5830
MK-145
Revision 09/04, Effective date – September 23, 2004
Page
21
SETUP, ADJUSTMENT and OPERATION:
STEP ACTION
DO NOT FORCE TOOL, it will do the job better and safer at the rate for
which it was designed.
8. Cutting
Tile
a) Feed the tile into the Diamond Blade with a
steady even pressure (forcing the tile will cause
the blade to slow which could cause motor
overheating)
9. Cutting
Complete
a) Turn saw off when cutting is complete
Off Position
Feed Tile Slowly
Advertising