MK Diamond MK-145 220 Volt - Manual (Page 15)

MK Diamond Products Inc. Customer Service Department (800) 421-5830
MK-145 Revision 09/04, Effective date – September 23, 2004 Page 15
UNPACKING, TRANSPORT and ASSEMBLY:
Table Stop Installation:
STEP ACTION
1. Locate Table Stop Retaining Slots
a) Rotate the MK-145 onto the back end
b) Locate the Table Stop Retaining Slots
2. Install the Table Stop
a) Install the Table stop into the MK-145 Retaining
Slots
3. Position the MK-145
a) Place the MK-145 onto the workbench
b) Position the Table Stop against the side of the
work bench
MK-145
Seated
Retaining
Slot
Table Stop