MK Diamond BX-4 - Manual (Page 10)

BX-4 10
PRODUCT SPECIFICATIONS:
The BX-4 is a versatile lightweight, dry, masonry saw. Operated and used according to this manual, the BX-4 will provide
years of dependable service.
General Description:
Part # Description
165486 With misting dust control
162761 Without misting dust control
The BX-4, is engineered as a 14” dry saw with or without misting system. The saw is capable of cutting brick and
masonry up to 8” x 8” x 16” in size; the blade has a five (5) inch cutting depth.
Motor and Weight Specifications:
Motor and Weight specifications for the BX-4 are listed in Table 2 below.
Blade Capacity:
The BX-4 uses a 14-inch diameter segmented dry MK Diamond blade with a .110-inch cutting width.
Masonry Types:
The BX-4 can cut a variety of masonry types including, cinder block, slump stone block, wall brick, paver brick, concrete
block and cylinders, roofing tile, marble, granite, decorative rock or almost any other non-ferrous material.
NOTE:
The BX-4 is not designed to cut plastic or ferrous (metals) material.
Spring Assisted Cutting Head:
The BX-4 is designed with a spring assisted Cutting Head to allow for easier step cutting. The Cutting Head can be
locked in any down position when cutting smaller pieces.
Lockable Trigger Switch:
The BX-4 is designed with a lockable trigger-operating switch in the handle to allow for ease of operation.
Removable Motor Air Filter:
The BX-4 is designed with an easy clean motor air filter to extend the life of the motor.
Replaceable Motor Brushes:
The BX-4 is designed with replaceable motor brushes to extend operating life.
PRODUCT SPECIFICATIONS
Voltage 115v
Amperage 15
Frequency 50-60Hz
RPM 3,500 rpm
Weight 70 lbs. (32 kg)
TABLE 2