MK Diamond BX-4 - Manual (Page 21)

BX-4 21
1
2
3
4
5
6
5
4
3
2
1
14
2
6
SETUP, ADJUSTMENT & OPERATION
5. ANGLE CUTS:
• Angle Cuts may be performed using the Step Cut, Chop
Cut or the Locked Cutting Head cutting methods. The
following is utilizing the Locked Cutting Head method.
• Loosen the knob (1) and remove the Adjustable
Cutting Guide (2).
• Reposition the Adjustable Cutting Guide (2) by
aligning it at 45 degrees to slots on the Ruler/Stop (3).
• Position masonry work (4) against the Adjustable Cutting
Guide (2) and Ruler/Stop (3).
• Set Depth Control (5) & lock cutting head with knob (6).
(See Page 20)
• Hold the masonry work in position. Lock the trigger
switch.
1
2
2
3
4
5