MK Diamond BX-4 - Manual (Page 24)

BX-4 24
MAINTENANCE & TROUBLESHOOTING
MAINTENANCE:
1. GENERAL MAINTENANCE:
• The following maintenance should be performed
following each use. Use light oil, such as WD-40 or 3-in-
1 when lubricating parts.
• Lubricate the Cutting Head Torsion Spring.
• Lubricate the Movable Cutting Table Roller Wheels
& Guide Rails.
2. MONTHLY MAINTENANCE:
The following should be performed monthly. Items should be
lubricated as directed.
• Clean and lubricate Inner Flange (1) and Motor Shaft.
• Clean and lubricate the Blade Retaining Screw (2).
• Check Roller Wheels (3) and Guide Rails (4) for
wear or damage.
1
2
3
4
Spring
Wheel (4)
Guide Rail