MK Diamond BX-4 - Manual (Page 17)

BX-4 17
SETUP, ADJUSTMENT & OPERATION
ADJUSTMENT AND OPERATION:
1. ADJUSTABLE CUTTING GUIDE INSTALLATION:
• Loosen knob (1) by turning counter-clockwise.
• Seat the Adjustable Cutting Guide (2) along the
Ruler/Stop (3). Turn knob (1) clockwise to tighten.
2. CUTTING SETUP:
• Set the Adjustable Cutting Guide (1). Identify the
Ruler/Stop (2). Set the edge of the Cutting Guide to
the desired cut length on the Ruler/Stop.
• Position your masonry piece by setting it against the
Adjustable Cutting Guide (1) and Ruler/Stop (2).
DO NOT FORCE the blade to cut! It will do the job better
and safer at the rate for which it was designed.
CAUTION
1
2
1
2
1
2
3