Create a new test run – MTS TestLine User Manual
Page 106
Advertising
![background image](/manuals/568077/106/background.png)
In this example, MPX had the axial channel named "Axial" while the controller had the axial channel
named "Ch 1." By changing the MPX names to "Ch 1," the resource naming errors were eliminated.
Create a New Test Run
1. Power up the system.
a) For the HPU, click Low, and then High.
b) For the HSM, click Low, and then High.
2. Click the New Test Run icon.
106 | MTS TestLine Test System Operation
Running the Example HCF Test
Advertising