MTS TestLine - Manual (Page 64)

a) Select the Exclusive Control check box.
b) For the HPU, click the Power Low, and then Power High buttons.
c) For the HSM, click Power Low only.
Verify Control of the Actuator
In this step you will position the actuator for the start of the test.
Warning :
Verifying control requires movement of the actuator.
Unexpected movement of the actuator can result in equipment damage or personal injury.
Ensure that the area is clear and that you can see what you are doing. Do not move the slider
until you are confident that you have the necessary skill to proceed safely.
1. Enable manual displacement control.
64 | MTS TestLine Test System Operation
Running the Example HCF Test