MTS TestLine - Manual (Page 74)

9. Turn off the Function Generator.
Click the Program Stop button to turn off the Function Generator.
Position the Actuator Using Displacement Control
In this procedure you will position the actuator for the start of the test.
Warning :
Verifying control requires movement of the actuator.
Unexpected movement of the actuator can result in equipment damage or personal injury.
Ensure that the area is clear and that you can see what you are doing. Do not move the slider
until you are confident that you have the necessary skill to proceed safely.
1. Relax the displacement limits so that you can find the travel end points.
74 | MTS TestLine Test System Operation
Running the Example HCF Test