Install the specimen, Set up meters for specimen installation – MTS TestLine User Manual
Page 78
Advertising
![background image](/manuals/568077/78/background.png)
Install the Specimen
Set Up Meters for Specimen Installation
1. Click the meters button in the Station Manager application.
2. If more than one meter appears, delete the extra instances so that only one meter remains.
To delete a meter, click the meter title bar, and then click the Delete button in the setup menu.
3. Set up a Running Max/Min Displacement Meter.
Use the following parameters:
•
Meter Type — Running Max/Min
•
Channel — Ch1 (or other depending on your configuration)
•
Signal — Displacement
•
Engineering Units — mm
78 | MTS TestLine Test System Operation
Running the Example HCF Test
Advertising