Ml/ h r – New Era NE-1600 Multi-Phaser Programmable Syringe User Manual

Page 32

Advertising
background image

New Era Pump Systems Inc.

WWW.SYRINGEPUMP.COM

Model NE-1600/NE-1800 Multi-Phaser™

Publication #1200-02

27

8/1/14

Phase

Function

15

PS:00

Phase

Function

16

LP:EN

8.4.5

Example 5: Control from a High-Low Pressure Sensor

10

25

m

l/

h

r

Pumping
Rate

Program
Output Pin

Event Input
Pin

Pressure high sensor

Pressure low sensor

Pressure trigger points

This example demonstrates a Pumping Program whose control depends on an external sensor. Assuming a
pressure sensor that is configured to detect a high pressure point and a low pressure point, the Pumping
Program individually selects whether it will react to the high or low pressure point.

The “Program Output” pin on the TTL I/O connector (pin 5) is used to select the high or low pressure point.
When low, the low pressure point is selected (PH:01), and when high, the high pressure point is selected
(PH:05). The Program begins by infusing continuously at 10.0 mL/hr (PH:02), while a background trap is set
for the low pressure point (PH:03). To create a delay when the pressure sensor is switched from high pressure
to low pressure when the “Program Output” pin is set, a small volume is pumped (PH:02, 06) before the
background traps are set.

When the low pressure trap is triggered, the pump sets the high pressure trap (PH:07) and begins to increment
the flow rate. The flow rate is incremented in 1.0 mL/hr steps with every 0.25 mL dispensed (PH:08-10). If
the high pressure trap hasn’t as yet been triggered, the flow rate will max out at 25.0 mL/hr while waiting for
the high pressure trap (PH:11). When the high pressure point is reached, the pump immediately will drop
down to 10.0 mL/hr (PH:02), and once again wait for the low pressure point.

Phase

Function

1

OUT.0

Phase

Function

Rate

Volume

Direction

2

RATE

10.0 mL/hr

0.005

Infuse

Phase

Function

3

EV:05

Phase

Function

Rate

Volume

Direction

4

RATE

10.0 mL/hr

0.0 mL (off)

Infuse

Phase

Function

5

OUT.1

Phase

Function

Rate

Volume

Direction

6

RATE

10.0 mL/hr

0.005

Infuse

Phase

Function

7

EV:01

Phase

Function

8

LP:ST

Advertising