New Era NE-1600 Multi-Phaser Programmable Syringe - Manual (Page 6)

New Era Pump Systems Inc. WWW.SYRINGEPUMP.COM Model NE-1600/NE-1800 Multi-Phaser™
Publication #1200-02 1 8/1/14
1. General Information
Thank you for purchasing the NE-1200/NE-1600/NE-1800 Multi-Phaser™ Programmable Multi-Syringe
Pump. With the NE-1200/NE-1600/NE-1800 syringe pumps you will be able to perform simple infusions
or implement a complex automated dispensing system.
Please familiarize yourself with the syringe pump’s operation by reading this user's manual. For future
reference, record the serial number, located on the rear of the pump, and the date of purchase.
New Era Pump Systems Inc., located in Farmingdale, NY USA, can be contacted at:
Phone: (631) 249-1392 FAX: (707) 248-2089 Email: [email protected]
WWW.SYRINGEPUMP.COM
This Operating Manual, and the NE-1200/NE-1600/NE-1800's hardware, electronics and firmware are
copyrighted.
Copyright 2000-2014, all rights reserved.
1.1 Warnings ! and Cautions !
!
Read the user’s manual
! No user serviceable parts are inside.
! Disconnect power from the pump when connecting or disconnecting cables.
! Do not immerse the pump in liquid
! Install on a stable surface.
! Keep hands and loose clothing away from the pumps moving parts.
! The pump can automatically start when the Pumping Program is operating or when attached to an
external control device.
! Prevent liquids from entering openings in the rear of the pump.
! Use only with the supplied power supply connected to a power source as specified on the power
supply label.
! Do not push objects of any kind into the chassis openings, except for appropriate cables and
connectors.
! If the pump becomes damaged, do not use unless certified safe by a qualified technician. Damage
includes, but is not excluded to, frayed cords and deterioration in performance.
!
Discharge static from control cables before connecting by touching the cable to ground.
!
Before touching the pump, discharge static by touching ground.
1.2 Disclaimer
New Era Pump Systems, Inc. makes no representations or warranties, expressed, statutory or implied,
regarding the fitness or merchantability of this product for any particular purpose. Further, New Era
Pump Systems Inc. is not liable for any damages, including but not limited to, lost profits, lost savings, or
other incidental or consequential damages arising from ownership or use of this product, or for any delay
in the performance of its obligations under the warranty due to causes beyond its control. New Era Pump
Systems, Inc. also reserves the right to make any improvements or modifications to the product described
in this manual at any time, without notice of these changes.
New Era Pump Systems, Inc's products are not designed, intended, or authorized for use in applications or
as system components intended to support or sustain human life, as a clinical medical device for humans,
or for any application in which the failure of the product could create a situation where personal injury or
death may occur.
All brand and product names used in this manual are the trademarks of their respective owners.