New Era NE-1600 Multi-Phaser Programmable Syringe - Manual (Page 7)

New Era Pump Systems Inc. WWW.SYRINGEPUMP.COM Model NE-1600/NE-1800 Multi-Phaser™
Publication #1200-02 2 8/1/14
1.3 Warranty
New Era Pump Systems Inc. warranties this product and accessories for a period of two years, parts and
labor, from the date of purchase. The repaired unit will be covered for the period of the remainder of the
original warranty or 90 days, whichever is greater. Return shipping charges are not included.
A return authorization number must be obtained from New Era Pump Systems Inc. before returning a unit
for repair. Warranty covered repairs will not be performed without a return authorization number. At the
option of New Era Pump Systems Inc., a defective unit will be either repaired or replaced.
This warranty does not cover damage by any cause including, but not limited to, any malfunction, defect
or failure caused by or resulting from unauthorized service or parts, improper maintenance, operation
contrary to furnished instructions, shipping or transit accidents, modifications or repair by the user, harsh
environments, misuse, neglect, abuse, accident, incorrect line voltage, fire, flood, other natural disasters,
or normal wear and tear. Changes or modifications not approved by New Era Pump Systems Inc. could
void the warranty. Wearable parts, such as drive nuts, are not covered by the warranty.
The foregoing is in lieu of all other expressed warranties and New Era Pump Systems Inc. does not
assume or authorize any party to assume for it any other obligation or liability.
1.4 Packing List
Included with the NE-1200/NE-1600/NE-1800 Multi-Phaser™ Programmable Multi-Syringe Pumps are
the following items:
• One of the following external unregulated power supply adapters:
Input: 120V AC 60 Hz, 220V AC 50 Hz, 240V AC 50 HZ,
or other custom specified power supply
Output: 12V DC @ 1000 mA (or compatible regulated power supply)
• This Operating Manual
• Models NE-1200 / NE-1800: Micro-Liter anti-siphon bracket
2. Overview
The models NE-1200/NE-1600/NE-1800 are general purpose multi-syringe pumps capable of infusion and
withdrawal. The model NE-1600 will hold up to 6 syringes of up to 140 mL. The model NE-1800 will
hold up to 8 syringes of up to 10 mL. The model NE-1200 will hold up to 12 syringes of up to 3 mL.
The syringe pumps are controlled from a microcontroller based system which drives a step motor,
allowing a large range of pumping rates configured to the inside diameter of the loaded syringes. The
syringes are driven from a drive-screw and drive-nut mechanism.
Features:
♦ Infusion and withdrawal pumping of syringes up
to 140 cc. Pumping rates from 0.454 µL/hr with
a 1 mL syringe to 1451 mL/hr with a 60 mL
syringe (model NE-1600), 410.7 mL/hr (model
NE-1800) with a 10 mL syringe.
♦ Stall detection: The pump automatically stops
when the pumping is impeded
♦ Infusion and withdrawal volumes separately
accumulated.
♦ Programmable dispense volumes.
♦ Programmable Phases allowing complex
pumping applications and interaction with
external devices.
♦ Program Sub-Programs, selectable by the user.
♦ Non-volatile memory of all operating parameters
and Pumping Program.
♦ RS-232 bi-directional control from a computer
♦ Built-in pump network driver. Pump network
supports up to 100 pumps and other devices.
♦ Two modes of RS-232 control, Basic and Safe.
Safe mode provides communication error
detection, loss of communication detection, and
automatic transmitting of alarm conditions.
♦ TTL logic I/O with firmware filtered control
inputs to eliminate glitches and ringing on the
control inputs.
♦ Configurable and programmable TTL
operational trigger for flexible logic control.
♦ Power Failure Mode: Restarts the Pumping
Program after a power interruption.
♦ Audible Alarm
♦ Many more features!