Yamato Scientific BH300 Thermo-Elite - Manual (Page 12)

9
Operation panel
attention : A detailed explanation of controller's specification, function, and operation method is
described to the appended special owner guide. Please refer it.
．
①POWER key
:
Switch the controller from the stand-by state to the operating
state, and vice versa.
②MODE key
:
Allow the functions, such as to enter, edit, and delete programs, to
set the time, and to switch the time setting.
③DISPLAY key
:
The content of the sub display is switched. The content of the
display is a set temperature, the remainder time, clock time, and
an execution segment number.
④MENU key
:
The operation mode is selected. Each mode of the operation of a
operation of a fixed value operation and an auto start and auto
stops and the program operations can be selected.
⑤ENTER key
:
Input values of the set value (temperature, time, and clock time,
etc.), the selection modes, and the execution segment numbers,
etc. are fixed.
①
②
③
④
⑩ ⑬ ⑩-c ⑩-b ⑪ ⑩-f ⑩-e ⑩-d ⑩-a
⑥ ⑫ ⑤
⑨ ⑭ ⑦
⑧