Yamato Scientific BH300 Thermo-Elite - Manual (Page 20)

17
Method of doing program operation
Selection of operation
menu
• Please select the PROGRAM
pushing the MENU key.
The MENU key is pushed.
The operation menu indicator of the
PROGRAM blinks.
• PROG is displayed in a sub-
display allowing you to input
the execution program
number.
Input of execution
program number
• Press ▲▼ keys to indicate
an desired program number
on the main display, and
press the ENTER key.
Press ▲▼ keys several times.
A main display displays the program
number.
Attention : If the program does not
exist, ―――― is blinking. Please
create the new program.
The ENTER key is pushed.
• Sub-display displays TIME
allowing you to enter when
to end the operation.
Input of time
• Press ▲ ▼ keys to blink
start time (or clock time) on
the main display, and press
the ENTER key.
Press ▲▼ keys several times.
A main display displays the hoping set
time.
The ENTER key is pushed.
• The standby indicator on the
operation monitor blinks
waiting for programmed
operation to start. The
operation begins after the
set time passes.