Yamato Scientific BH300 Thermo-Elite - Manual (Page 18)

15
Method of doing auto stop operation
Selection of drive menu
• Please select an AUTO STOP
pushing the MENU key.
The MENU key is pushed.
The menu indicator of an AUTO
STOP blinks.
• It is displayed in a sub-
display as TEMP and enters
the state that a set tempe-
rature can be input.
Input of set temperature
• Please make a main display
display an arbitrary set
temperature pushing ▲ ▼
keys and push the ENTER
key.
Press ▲▼ keys several times.
A main display is made to display the
hoping set temperature.
The ENTER key is pushed.
• Sub-display displays TIME
allowing you to enter when
to end the operation.
Input of time
• Press ▲ ▼ keys to blink
stop time (or clock time) on
the main display, and press
the ENTER key.
Press ▲▼ keys several times.
A main display is made to display the
hoping set time.
The ENTER key is pushed.
• The sub-display displays
PUMP allowing you to select
pump status after time is up.