Yamato Scientific BH300 Thermo-Elite - Manual (Page 19)

16
Setting pump operation
status
• Press ▲▼ keys to indicate
pump status (ON or OFF) on
the main display after
operation stop. Please push
the ENTER key afterwards.
Press ▲▼ keys several times.
A main display displays ON or OFF.
The ENTER key is pushed.
• The sub-display displays
WAIT allowing you to set the
wait function.
Selection of wait function
• Press ▲▼ keys to indicate
waiting function (ON or
OFF) on the main display.
Then press ENTER key.
Press ▲▼ keys several times.
A main display displays ON or OFF.
The ENTER key is pushed.
• This operation activates the
auto stop operation
Count time
• The timer of an auto stop
starts to count down at the
following.
When the wait function is
turning on
It starts when set temperature
has reached target value.
When the waiting function is OFF
or when stop time is set
in clock time.
It starts right after the auto stop
operation is started.