Yamato Scientific BH300 Thermo-Elite - Manual (Page 24)

21
Method of doing strength setting of circulating pump
Function menu selection
• First of all, please push the
MODE key. Next, please
make a main display display
PUMP with ▲ ▼ keys and
push the ENTER key.
The MODE key is pushed.
Press ▲▼ keys several times.
A main display is made to display
PUMP.
The ENTER key is pushed.
• Sub-display displays PUMP
allowing you to set strength of
circulating pump to a sub
display.
Set input
• Please make a main display
blinking display arbitrary
strength by pushing ▲ ▼
keys and push the ENTER
key.
Press ▲▼ keys several times.
A main display displays strength of the
pump.
Attention : Strength of the pump is 1-
10. 10 is strongest circulation
strength.
The ENTER key is pushed.