Yamato Scientific BH300 Thermo-Elite - Manual (Page 13)

10
⑥▲▼(up and down)key
:
The set value (temperature, time, and clock time, etc.) is changed
and the function provided in the function menu is selected.
⑦ESCAPE key
:
It returns to the state before invalidating the content input
immediately before and inputting.
⑧Main display
:
The measurement temperature and the set value (temperature,
time, and clock time, etc.) are displayed. Moreover, program
information and error information, etc. are displayed.
⑨Sub display
:
Time a set temperature, the remainder time, and now and the
execution segment number, etc. are displayed.
⑩Operation monitor
:
The operation is displayed.
⑩-a Standby indicator
:
blinks at the standby before begin to be operation.
⑩ -b Temperature pattern
indicator
:
The set temperature pattern of the be in operation is lighting
displayed. The part under execution does the blinking display.
⑩-c OVER indicator
:
When an auto stop or the program operation ends, it blinks.
⑩-d TROUBLE Indicator
:
When abnormality is detected, it blinks.
⑩-e REMOTE indicator
:
When remotely driving (optional), it lights.
⑩-f Key Lock indicator
:
It lights while the function to lock the key of the operation panel is
operating.
⑪Operation menu
indicator
:
The operation mode under execution is lighting displayed.
⑫ Sub display contents
indicator
:
The content (set temperature, remainder time, clock time, and
execution segment) displayed in a sub-drop is lighting displayed.
⑬Heater energizing
indicator
:
When the heater is energizing, it lights.
⑭Time display indicator
:
When the time setting is a clock time set mode, it lights.