Yamato Scientific BH300 Thermo-Elite - Manual (Page 25)

22
Setting operation status of refrigerator
Function menu selection
• First of all, please push the
MODE key. Next, please make
a main display display REFR
with ▲▼ keys and push the
ENTER key.
The MODE key is pushed.
Press ▲▼ keys several times.
A main display is made to display
REFR.
The ENTER key is pushed.
• Sub-display blinks REFR
allows you to set the
operation mode of the
Refrigerator
Set input.
• Press ▲▼ keys to display
desired operation status on
the main display, and press
the ENTER key.
Press ▲▼ keys several times.
A main display displays CONT or
OFF.
Attention : CONT means the
continuous running and OFF mean
the stop.
The ENTER key is pushed.
Notes
•
This function is equipped only
in BH200/300.
•
When it is 45 ℃ or more in set
temperature, the refrigerator
stops automatically even if the
refrigerator is continuously
driving.
•
The refrigerator is recommended
to be set in turning off as long
as there is no heat load special
environ-mental temperature
+10℃ or more a set temperature.
It is from respect to a
preferable usage of the saving
of safety and the energy of the
equipment.