Yamato Scientific BH300 Thermo-Elite - Manual (Page 15)

12
Operation method
Attention : Please operate according to the following procedures when the preparation for the
operation is complete.
1. Turning on of power supply 2. Selection of operation menu
• Please turn on the leak breaker in the back of
the controller. • Press the DRIVE MENU key several times to
select desired operating method.
• The lighting display is done by a sub display at
present time. • It allows you to enter each parameter into a
flashing menu.
•
Please push the POWER SUPPLY key in the
operation panel.
•
This machine becomes a stand-by state by
turning on the power supply. Under such a
condition, it is possible to shift to all operation
modes by pushing the DRIVE MENU key.
3. Explanation of operation menu
Fixed
Temperature
:
It is a drive method of setting the temperature of the target and keeping the
temperature constant.
Auto stop :
It is a drive method of stopping the state that a fixed value is driven at
arbitrary after time passes or clock time.
Auto start :
It is a drive method the fixed value drive's beginning at after arbitrary time
passes or clock time.
Program :
The operation is begun and is stopped at after arbitrary time passes or clock
time. Moreover, the temperature can be changed at arbitrary set time and it
be repeated.