Rockwell Automation 281E ArmorStart EtherNet/IP - Getting Started - Manual (Page 21)

Publication 280E-QS001B-EN-P – February 2011
ArmorStart EtherNet/IP Distributed Motor Controller Getting Started 21
ArmorStart EtherNet/IP
Add-On Profile for Logix The Add-On Profile (AOP) must be installed in order for RSLogix 5000 to fully
support the ArmorStart EtherNet/IP product. The AOP can be downloaded
from http://www.rockwellautomation.com/support/downloads.html.
Example - Adding ArmorStart to RSLogix 5000
1. In the RSLogix 5000 tree select the Ethernet® adapter and add a new
module.
Note: The ArmorStart EtherNet/IP AOP must be installed prior to this
step.
Figure 30 – Controller Organizer