Rockwell Automation 281E ArmorStart EtherNet/IP - Getting Started - Manual (Page 8)

8 ArmorStart EtherNet/IP Distributed Motor Controller Getting Started
Publication 280E-QS001B-EN-P – February 2011
Control and Power
Connections
Figure 7 – ArmorStart EtherNet/IP Power and Control Terminals
See Detail A Detail A
Table 1 - Power, Control and Ground Terminal Designations
Terminal Designations No. of Poles Description
A1 (+) 2 Control Power Input
A2 (–) 2 Control Power Common
A3 (+) 2 Unswitched 24V Control
PE 2 Ground
1/L1 2 Line Power Phase A
3/L3 2 Line Power Phase B
5/L5 2 Line Power Phase C