Rockwell Automation 281E ArmorStart EtherNet/IP - Getting Started - Manual (Page 3)

Publication 280E-QS001B-EN-P – February 2011
ArmorStart EtherNet/IP Distributed Motor Controller Getting Started 3
ArmorStart EtherNet/IP
Features
Figure 1 – Bulletin 280E/281E ArmorStart with EtherNet/IP™
Communication Protocol
Figure 2 – Bulletin 284E ArmorStart with EtherNet/IP™ Communication Protocol
ATTENTION: Only qualified personnel familiar with adjustable frequency
AC drives and associated machinery should plan or implement the
installation, startup, and subsequent maintenance of the system. Failure
to do this may result in personal injury and/or equipment damage.
LED Status
Indication and Reset
Motor Connection
4 Inputs (Micro/M12)
IP Address Notation Area
Ethernet Ports (DLR)
Local Disconnect
Ground Terminal
2 Outputs (Micro/M12)
Hand-Off-Auto Keypad
IP Address Switches
Control Module
Base Module
LED Status
Indication and Reset
Motor Connection
Source Brake Connection
4 Inputs (Micro/M12)
Ethernet Ports (DLR)
Local Disconnect
Ground Terminal
2 Outputs (Micro/M12)
IP Address Switches
IP Address Notation Area
Hand-Off-Auto Keypad
Control Module
Base Module
Dynamic Brake Connection