Rockwell Automation 442L-SFZNMN SafeZone Mini Safety Laser Scanner User Manual - Manual (Page 16)

14 Rockwell Automation Publication 10000337275 Ver 01—October 2014
Chapter 3 Product description
Status indicators LEDs and seven­segment display
The LEDs and the seven­segment display indicate the operational status of the SafeZone Mini. They are on the front face of
the safety laser scanner.
Fig. 6: Status indicators on the
SafeZone Mini
The symbols have the following meaning:
Table 3: Status indicators on the
SafeZone Mini
Note You will find detailed information in Chapter 11, “Error and status indications on the LEDs” on page 52 and in “Error and
status indications on the seven­segment display” on page 52).
Symbol SafeZone Mini
OSSDs in the OFF state (e.g. in case of object in the protective field, monitored contour
changed, reset required, lock­out)
Warning field interrupted (object in one of the warning fields)
OSSDs in the ON state (no object in protective field)
Reset required
Optics cover contaminated
Seven­segment display for the indication of the status and errors .