Rockwell Automation 1503VC IntelliVAC Contactor Control Module - Manual (Page 11)

Chapter
2
1503-UM051D-EN-P – June 2013
Receiving and Storage
Receiving Upon receiving the controller, remove the packing and check for
damage that may have occurred during shipping. Report any
damage immediately to the claims office of the carrier.
NOTE:
If the IntelliVAC module is an integral component of a
complete MV controller (Bulletin 1500/1900), special receiving
and handling instructions will apply. For details, refer to the
service manual provided with the equipment.
Storage It is important to consider the following storage requirements if you
are not installing your controller immediately after receiving it.
• Store the controller in a clean, dry, dust-free environment.
• Storage temperature should be maintained between -40°C and
85°C (-40°F and 185°F).
• Relative humidity must not exceed 95%, non-condensing.